Equipment related to all models
In the upper part of the tanks there is a manhole of 400 mm, of the pressed type, flanged and bolted with the interposition of a PVC sealing gasket.
On the manhole cover, on the upper side are welded:
a 3" loading spout;
a 1" or 1/½" socket for vent and terminal flame arrestor.
In the lower part of the same, on the loading pipe there is a spacer for the load limiting valve.
The tanks are also equipped with the following details:
a lifting and fixing eyebolt for transport;
4 support feet;
grounding;
socket for 1/½" clock level indicator positioned on the upper generatrix of the tank on the side opposite the manhole;
Service ladder (except for S 1500, S 2000 and S 3000 models).
The tanks and containment basins are treated with epoxy paints.
Via Taddei, 16, 65020 Rosciano PE, Italia