Florida NAZA 1V mounted sprayer
STANDARD EQUIPMENT:
- Polyethylene tank
- Hot galvanized frame and conveyor
- Aluminum impeller with variable pitch blades and clutch
- Two-speed gearbox and disengagement
- Aluminum manual control with pressure regulator placed on the frame
- Complete connections with R1 hydraulic type hoses
- External suction filter with check valve
- Inspectable hydraulic agitator
- Double brass jets with non-drip and ceramic plates
- Cast holder rods in stainless steel
- Hand washing tank
- External level tube with graduated scale
- Side valve for tank emptying
- Circuit washing device
AVAILABLE PUMPS:
COMET ALUMINUM: APS 51, APS 71, APS 96, APS 121.
COMET BRASS: IDS 960, IDS 1201, IDS 1401.
ANNOVI REVERBERI ALUMINUM: AR 503, AR 813, AR 1064, AR 1203, BHA 130
ANNOVI REVERBERI BRASS: BHS 130
TECHNICAL FEATURES:
Norms
All FLORIDA sprayers comply with CE regulations concerning safety and health protection;
they also comply with other European standards on safety and environmental protection.
Tank
- Effective capacity greater than 5% of the nominal capacity;
- Quantity of residual liquid in a flat position and with an inclination of 10% lower than the limits established by current regulations;
- Tank for washing the hydraulic circuit;
- Tank for clean hand washing water.
Jets
Double body brass jets with 0.5 bar diaphragm check valve. Available with ceramic plates, Albuz nozzles, Spraying Systems nozzles. For normal, medium and low volume treatments.
Multiple models available;
For more information, visit the attached technical sheet;
Available or to order from retailers
Viale del Lavoro, 14, 37050 Belfiore VR, Italia
and then Add to home screento install the Intractor app on your